ULTRA HIGH DEFINITION CERAMIC COATING KIT AUTOGLYM UHDCCKIT

Auto Glym Ultra High Definition Ceramic Coating Kit

The Auto Glym Ultra High Definition Ceramic Coating Kit represents our most durable paint protection solution. Developed meticulously by our chemists, this advanced formulation delivers an unparalleled depth of gloss and long-lasting protection for your vehicle's paintwork.

This kit provides the essential tools to prepare your paint surface and apply a semi-permanent ceramic coating, designed to maintain an immaculate finish for up to 12 months. For enhanced performance and maximum durability, consider using Auto Glym Ultra High Definition Shampoo and Ultra High Definition Wax as part of your car care routine.

Key Features:

• Most durable paint protection offered by Auto Glym.
• Achieve professional results and an immaculate finish at home.
• Enhances depth of gloss and provides superior protection.
• Semi-permanent coating lasts up to 12 months.
• System designed for easy and enjoyable car care.

What's Inside The Box:

• 1 x UHD Preparation 100ml
• 1 x UHD Ceramic Coating 100ml
• 1 x UHD Ceramic Coating Applicator
• 1 x Preparation Cloth
• 1 x Finishing Cloth

Usage Instructions:

Paintwork Preparation with UHD Preparation:

1. Ensure the vehicle's paintwork is clean, dry, and free from contaminants. It is recommended to wash the vehicle thoroughly and remove any fallout or surface contaminants with a fallout remover or clay bar. For optimal results, address light scratches and swirl marks with a suitable polish or scratch remover prior to application.
2. Apply UHD Preparation directly to the Preparation Cloth. Wipe down all intended paintwork systematically in straight lines to remove any existing waxes, sealants, or oils. Ensure complete coverage. Use a dry section of the Preparation Cloth to wipe away any remaining residue, turning the cloth frequently to avoid saturation.

Paintwork Protection with UHD Ceramic Coating:

1. Plan your application by working in approximately 50cm x 50cm sections. Note that temperature and humidity will affect drying and curing times. Use the first applied panel as a guide for subsequent applications.
2. Apply UHD Ceramic Coating in straight lines onto the UHD Ceramic Coating Applicator, avoiding excessive product. The coating will begin to evaporate.
3. Buff off the product when a beaded appearance and film formation are observed. This typically takes 1-2 minutes in warmer conditions and 3-5 minutes in cooler conditions.
4. After applying to one section and allowing the appropriate curing time, buff thoroughly with the red Finishing Cloth.
5. Proceed to the next section, adding small amounts of product to the applicator if needed. Buff when the section appears dry.
6. Once all intended areas are coated and buffed, check the paintwork in different lighting conditions. Re-buff any missed areas with the Finishing Cloth.
7. Allow the UHD Ceramic Coating to cure for a minimum of 4 hours, ensuring the vehicle is protected from wet weather, high dust, and contamination during this period.
8. Do not wash the vehicle for 24 hours after application.

Note: If the product is allowed to cure for too long and becomes difficult to remove, reapply a small amount of UHD Ceramic Coating over the affected area and buff immediately. Remove any excess product from plastic or glass surfaces using UHD Preparation.