MB MIG WIRE LINER 0.6 > 0.9mm, BLUE 3 METER LINER
MB MIG WIRE LINER 0.6 > 0.9mm, Blue, 3 Meter Liner. This liner transports mig wire from the wire feed unit through the mig torch to the contact tip. To fit, unscrew and remove the liner nut at the euro connector end, then remove the gas nozzle and contact tip. Insert the liner, refit the liner nut, and cut off excess liner flush with the tip adaptor. Screw in the contact tip, which will tension against the liner for a gap-free feed. If the contact tip is too tight, cut the liner back accordingly.
- SKU
- 33-9TFMB0609.3
- Brand
- No Brand
- Availability
- In Stock (2)
FULL DESCRIPTION
MB MIG Wire Liner - Precision Wire Guidance for Your Torch
This MB MIG Wire Liner is a critical component for ensuring a smooth and consistent flow of MIG wire from your wire feed unit through the torch to the contact tip. Designed for optimal performance, this liner plays a vital role in transferring welding current effectively.
Key Features:
- Wire Size Compatibility: Suitable for MIG wire ranging from 0.6mm to 0.9mm in diameter.
- Length: 3 meter length provides ample reach for most welding applications.
- Color: Distinctive blue color for easy identification.
- Torch Compatibility: Designed for Binzel type torches and compatible with various leading brands including Weldline, Binzel, Starparts, SWP, and Parweld.
Proper installation is key to achieving the best welding results. To fit, unscrew and remove the liner nut at the wire feed end, then remove the gas nozzle and contact tip. Insert the new liner, refit the liner nut, and trim any excess liner material so it is flush with the tip adaptor. Finally, screw in the contact tip, ensuring it is tensioned against the liner for a gap-free wire feed. If the contact tip is too tight to insert, trim the liner back slightly to adjust.