2Bros Parts

2021+ BMW G80 M3/M4 Performance Intercooler, Black

£4,528.75

4.4 Trustpilot 99.9% positive on eBay

Free UK delivery 2–4 business days

Spread the cost with Klarna 18+, T&Cs apply

1
Specifications
SKU
TPC_MMINT-G80-21BK
Brand
Mishimoto
Availability
In Stock (8)
Part Number
MMINT-G80-21BK
Core Type
Bar-and-Plate
Core Thickness
124.5mm
Core Length
248.9mm
Show more +7
Core Height
160mm
Overall Length
292.1mm
Overall Width
533.4mm
Overall Height
332.7mm
Maximum Boost
4.14bar
Maximum Power
1150hp
Weight
16.057kg
Delivery2–4 business days
14-Day ReturnsHassle-free
Easy CheckoutCard friendly
Product details

FULL DESCRIPTION

The2021+ BMW G80 M3/M4 Performance Intercooler, Black is a Mishimoto bar-and-plate intercooler in a black finish, supplied with a charge air cooler manifold for port injection. It combines a 33 percent core volume increase over stock with the fuel rail, lines and brackets listed below.

The BMW M2, M3, M4, X3 and X4 models shown below are the listed vehicles for this part.

Mishimoto Performance Intercooler, Black

The S58 under the hood of the 2021+ G80 M3 has over 45 years of lineage behind it. Like every generation before it, the G80 M3 has the potential to be even more powerful, but with great power requires serious cooling. Luckily, Mishimoto has developed a charge air cooler manifold suited for serious power.

The stock G80 M3 charge air cooler is designed as a combination intercooler and intake manifold, which is efficient, but it is let down by the tube-and-fin core crimped onto the thermoplastic plenum. Those crimps are quickly becoming a notorious weak point, with many failing at as little as 3 lbs. of boost over stock. The solution is Mishimoto's cast aluminum and TIG-welded manifold with a robust bar-and-plate core, designed to withstand boost pressures over 60 PSI.

Reliability aside, the Mishimoto charge air cooler has further improvements. The core is 33-percent larger than stock, and the manifold flows an average of 14-percent better to each cylinder. That, combined with the increased cooling capacity of the bar-and-plate core, results in reduced pressure drop and intake air temperatures as low as 11 degrees above ambient under heavy load.

  • Plenum design: the CFD-designed lower plenum features an internal diverter to ensure the entire core is utilized and each cylinder receives even flow for safe and optimal fueling.
  • Runners: the cast and CNC-machined runners feature O-ring grooves to accept factory seals, and a fiber gasket insulates the runners from engine heat for those seeking every degree of cooling.

Key Features

  • Design features a robust bar-and-plate core TIG-welded to cast aluminum end tanks, for superior durability and longevity compared to plastic stock tanks
  • Includes billet fuel rail, lines, and precision-drilled ports for port injection
  • Includes PTFE -AN fuel lines that tee into stock fuel lines
  • Robust bar-and-plate core for IATs as low as 11 degrees above ambient
  • Improves flow to each cylinder by an average of 14 percent
  • Improves cooling without increasing pressure drop over stock
  • 33 percent core volume increase over stock with a 24 percent greater flow area
  • CFD-designed lower plenum for even flow distribution and safe fueling
  • Cast and CNC-machined runners accept stock O-rings or included fiber gasket
  • Includes harness brackets, engine cover mount, and custom EVAP lines for seamless install
  • Plenum cutout allows easy access to oil filter without impeding flow
  • Includes two additional 1/8-NPT ports for manifold reference lines or sensors
  • Also fits X3 M and X4 M models with included EVAP plug and fitting
  • Patent Pending
  • Mishimoto Lifetime Warranty
  • Includes: (1) Mishimoto Charge Air Cooler Manifold, (1) Intake Manifold Gasket, (1) Manifold/Intercooler Accessory Bracket Set, (6) -6 ORB Plugs, (6) -6 ORB to 1/8-in NPT Adapters, (6) -6 ORB to 1/16-in NPT Adapters, (1) Fuel Rail, (6) Fuel Injector Blanks, (2) -8 ORB Plugs, (1) -10 ORB Plug, (2) 1/8-in NPT Plugs, (2) EVAP System Hoses, (1) Port Injection Fuel Line Kit, (1) Hardware Kit
  • Please note: Use of the included fuel rail is optional and for race-use only. The fuel rail has a tamper-proof sticker and may be removed only if the vehicle will no longer be used on the street or highway. Check local emissions regulations before removing.

Specifications

  • Brand: Mishimoto
  • Product type: Intercooler Kits
  • Core type: Bar-and-Plate
  • Core height: 6.3 in (160 mm)
  • Core length: 9.8 in (248.9 mm)
  • Core thickness: 4.9 in (124.5 mm)
  • Engine codes: S58B30
  • Chassis codes: G80, G82, G83, G87, F97, F98
  • Overall width: 21 in (533.4 mm)
  • Overall height: 13.1 in (332.7 mm)
  • Overall length: 11.5 in (292.1 mm)
  • Maximum recommended boost: 60 psi (4.14 bar)
  • Maximum recommended power: 1150 hp
  • Size (width x height x length): 355.6 x 406.4 x 609.6 mm
  • Weight: 16.057 kg
  • Barcode (EAN/GTIN): 840197718087
  • Market: European

Vehicle Compatibility

This intercooler is listed for the following vehicles:

  • BMW M2 2023-2025
  • BMW M3 2021-2025
  • BMW M4 2021-2025
  • BMW X3 2020-2025
  • BMW X4 2020-2025
Before you buy

QUESTIONS? JUST ASK

Talk to John or Phil. Real people, Monday to Friday, 10:00 to 17:00.

Call or email us with your make, model and year and we will check it for you before you order.

UK delivery is £4.99, or free on orders over £60. Orders ship within 3 working days, then delivery takes 2–4 business days. Delivery details

Yes. You have 14 days from delivery to return it, unused and in its original packaging. Contact us first and we will send you the return instructions. Returns policy

By card, PayPal, Apple Pay or Google Pay, or spread the cost with Klarna. Payment is taken securely by Stripe, and the options for your order are shown at checkout.

More answers in our FAQ.

Trade pricing available

Buying parts for your business? Apply for a 2BrosParts trade account.

Apply for Trade
1