AC Schnitzer wheel 9.0 x 21" offset 42 "BiColor"
4.4 Trustpilot 99.9% positive on eBay
Free UK delivery 2–4 business days
- SKU
- TPC_36112105008
- Brand
- AC Schnitzer
- Availability
- Out of Stock
- Part Number
- 36112105008
FULL DESCRIPTION
TheAC Schnitzer wheel 9.0 x 21" offset 42 "BiColor" is a 9.0 x 21 inch AC Schnitzer wheel with an offset of 42 in the BiColor version, listed for front and rear axle use.
The supplier lists the BMW 4 Series and 3 Series as the vehicles for this wheel.
AC Schnitzer Type VIII Lightweight Forged Wheels
Philosophy and Design
State-of-the-art rim technology: AC Schnitzer Type VIII lightweight forged wheels. This generation of wheels, developed specifically for the sporty BMW models, demonstrates what appears to be a contradiction in terms: reduced weight while maintaining the same large wheel diameters and widths. AC Schnitzer engineers and designers achieved this feat in cooperation with the legendary wheel manufacturer FUCHS. Compared to the BMW series counterparts (e.g., Performance Double Spoke 269), they save 4.2 kg per wheel. This leads to a 33.6% reduction in centrifugal forces at the axles, resulting in noticeably improved cornering handling and simultaneously increased driving pleasure. Roman Fenners, responsible for development at AC Schnitzer, describes the different driving experience as follows: "16.8 kg less unsprung mass on the car is an incredible amount. The car's handling immediately improves significantly. With 16.8 kg rotating on the axles, the weight feels four times heavier, depending on the speed. In terms of driving dynamics, we've saved a whopping 67 kg with the AC Schnitzer Type VIII lightweight forged wheels. And that's sensational." Due to the special material structure, the design of the Type VIII lightweight forged wheels has become slimmer than the other members of the Type VIII wheel series.
- High-quality lightweight forged wheels save up to 25-35% in weight compared to conventional cast wheels
- Noticeable reduction of unsprung masses and gyroscopic forces on the car, resulting in significantly increased driving dynamics
- Significantly improved acceleration and deceleration due to lower masses
- Improved cornering
- Integrated "Forged" logo
- Integrated AC Schnitzer logo
- High-quality clear coat to protect the wheel against corrosion, resulting in a long service life
- Open design in anthracite/silver
Material
Around 97 percent of the melt consists of aluminium, but the remaining three percent of the wrought alloy also plays a role in influencing the desired material properties for the ideal wheel. In addition to the main component, aluminium, the alloy also contains one percent each of magnesium and titanium (which ensures finer grain). The precise composition of the material alloy has a significant influence on the final properties of the wheel.
- Pure aluminium: around 97 percent of the alloy consists of pure aluminium. The remaining three percent of the wrought alloy is important for the material's properties.
- Chromium: the master alloy AlCr20, which contains the hard metal chromium, improves recrystallisation resistance. Master alloy is a mixture of aluminium with other substances; in this case, it is a maximum of 0.25 percent by weight of chromium, which is a very small amount.
- Magnesium: magnesium, together with pure silicon, increases the strength of the overall alloy. The maximum proportion of these materials is 1.2 and 1.3 percent by weight, respectively.
- Titanium: these shiny bars are the master alloy AlTi5B1. It serves to refine the grain structure of the overall alloy. The proportion of the expensive raw material titanium is only 0.1 percent by weight.
- Silicon: these irregularly shaped lumps are silicon, which is only added to the alloy together with magnesium. This increases the strength. The silicon content is between 0.7 and 1.3 percent by weight.
- Manganese: the addition of 0.4 to 1.0 percent manganese makes the alloy tougher. The manganese has a positive effect on recrystallisation behaviour.
Production
Forging is a complex process that must ensure the highest levels of safety. In many steps, the wheel is prepared for its important role in ensuring a long vehicle life. This process guarantees excellent material properties, which are the reason for the low weight of our forged wheels. Forged wheels offer optimal safety for the occupants, even in critical driving situations.
- Step 1, the nozzle: a cast block of over 6 m in length, also manufactured at OTTO FUCHS, is the starting material from which a nozzle, which is precisely tailored to the later wheel, is sawn off.
- Step 2, pre-forging: in the first forging stage, the nozzle is pre-forged into a rotationally symmetrical blank with a force of 4,000 tons.
- Step 3, designing: in the second forming stage, the styling is pressed into the pre-forged blank under a 7,000 ton press, which largely gives the wheel its final appearance.
- Step 4, punching: in the final forging stage with 800 tons of press force, the future ventilation hole windows and the hub bore are punched out and the burr from excess material on the outer circumference is sheared off.
- Step 5, flow pressing: the outer edge of the blank is heated. The entire rim area, from the outer to the inner flange, is rolled out. This is precisely what makes a Fuchsfelge®.
- Step 6, finishing: the final step involves finishing: turning, drilling, and deburring. Painting completes this complex process.
Source: Material and production: Otto Fuchs KG
Bicolour Anthracite/Silver surface
In this process, the wheel is first primed and then completely painted. The surfaces that will later have a metallic lustre are then turned and polished to a high gloss. Finally, a two-coat clear coat is applied, consisting of a polyester primer and an acrylic clear coat.
Test procedures and safety
After their design, the first sample rims are manufactured under real production conditions. These must undergo a multitude of tests. Among other things, their strength is tested. The bending test simulates the "rim lifespan." Every AC Schnitzer rim must survive this lifespan unscathed in order to be produced and sold. Vehicle-specific tests, including test installations with clearance measurements and driving tests on public roads and racetracks, follow. Only after these procedures do our rims receive homologation, i.e., approval for use on public roads. Wheels are safety-critical components. Therefore, they are inspected and tested with the utmost care. This begins with initial chemical material tests and concludes with rigorous endurance tests on test machines:
- §30 StVZO wheel guidelines
- ECE R124
- Bending tests
- 90° impact test
- Rolling tests
What is included
- Rim Type VIII forged Bicolour Silver/Anthracite
- Specific hub cap
- Quality tag
- Certificate of approval
- Optional vehicle and rim-specific mounting and fastening material
- Certificate of authenticity
- 2-year manufacturer's warranty
Uniqueness of the lightweight forged wheels Type VIII
- Made in Germany
- Weight optimised
- Developed exclusively for BMW vehicles
- With exclusive AC Schnitzer and "Forged" logos
- Compatible with standard RDC system
- Also available as a complete wheel set
- 2-year warranty
- Production monitored according to ISO standards
- Bi-colour silver/anthracite
- KDS mount for wheel alignment according to BMW specifications is available
- Spacers / fitting package for the best possible position in the wheel house (to be ordered separately)
- Vehicle-specific fitting package
Specifications
- Brand: AC Schnitzer
- Product type: Wheels
- Fitment notes: For Front- And Rear Axle; For Cars With Trailer Hitch On Request! | For Front- And Rear Axle
Vehicle Compatibility
This wheel is listed for the following BMW models:
- BMW: 4 Series, 3 Series
QUESTIONS? JUST ASK
Talk to John or Phil. Real people, Monday to Friday, 10:00 to 17:00.
Call or email us with your make, model and year and we will check it for you before you order.
UK delivery is £4.99, or free on orders over £60. Orders ship within 3 working days, then delivery takes 2–4 business days. Delivery details
Yes. You have 14 days from delivery to return it, unused and in its original packaging. Contact us first and we will send you the return instructions. Returns policy
By card, PayPal, Apple Pay or Google Pay, or spread the cost with Klarna. Payment is taken securely by Stripe, and the options for your order are shown at checkout.
More answers in our FAQ.
Trade pricing available
Buying parts for your business? Apply for a 2BrosParts trade account.


