PRESSURE WASHER POLAR WASH AUTOGLYM PWS002.5
A safe and effective cleaner for home pressure washers. Polar Wash is a safe and effective cleaner applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Polar Blast. This cleaner covers your vehicle in a blanket of foam to make light work of dirt, traffic film, and road grime removal. How to use: Check that bodywork and wheels are cool and out of direct sunlight. Pre-wash with Polar Blast or rinse first with water. Polar Wash can be used at various dilutions depending on foam density; do not use a dilution stronger than 50:50. Adjust foam gun settings as required. 250ml of mixed solution should cover an average-sized car. Spray Polar Wash onto the vehicle from the bottom up, covering all exterior surfaces, including glass and wheels. The cleaner loosens dirt on all surfaces. Agitate the foam with a sponge or wash mitt for a thorough clean. Rinse thoroughly from the bottom up and dry. Polar Wash is not suitable for use on soft top convertibles. Follow with Polar Seal for a protective, hydrophobic coating. Weight: 2678g. Manufacturer: Auto Glym.
- SKU
- 01-633.AG
- Brand
- Auto Glym
- Availability
- In Stock (4)
FULL DESCRIPTION
Autoglym Polar Wash Pressure Washer Cleaner
Autoglym Polar Wash is a specialized cleaning solution designed for use with home pressure washers and foam guns. It creates a thick blanket of foam that effectively lifts and removes dirt, traffic film, and road grime, making the cleaning process more efficient.
This cleaner is ideal for use after a pre-wash with Autoglym Polar Blast or a thorough rinse to loosen heavy contamination. It works by covering the vehicle in a rich foam that actively breaks down surface contaminants.
Key Features:
- Formulated for use with pressure washers and foam guns.
- Creates a dense foam for superior dirt removal.
- Effectively tackles traffic film and road grime.
- Safe for use on vehicle bodywork and wheels (when applied correctly).
- Recommended dilution is no stronger than 50:50.
- A 250ml solution is typically sufficient for an average-sized car.
How to Use:
- Ensure the vehicle's bodywork and wheels are cool to the touch and not in direct sunlight.
- For best results, pre-wash with Autoglym Polar Blast or rinse the vehicle to loosen heavy dirt.
- Mix Polar Wash with water in your foam gun. Dilutions up to 50:50 are recommended, adjusting settings for desired foam density.
- Apply the foam evenly over the entire vehicle, starting from the bottom and working upwards, covering all exterior surfaces including glass and wheels.
- Allow the foam to dwell and loosen dirt. Agitate the foam with a sponge or wash mitt for a more thorough clean.
- Rinse the vehicle completely, starting from the bottom and moving upwards.
- Dry the vehicle thoroughly.
Important Note: Autoglym Polar Wash is not suitable for use on soft-top convertible roofs.
Top Tip: For an added layer of protection and a hydrophobic finish, follow up with Autoglym Polar Seal.